How to Perform the Roborock Setup Steps?

The Roborock Vacuum is a renowned robot vacuum known for its top-notch cleaning. This vacuum offers a huge range of features that enhance its performance. With this vacuum, you can ensure a clean and well-kept floor. To make the most of the vacuum, you must proceed with the Roborock setup. The setup will ensure the optimal functioning of the vacuum.

To set up the vacuum, you simply need to log into the vacuum’s interface. Through the interface, you can configure the vacuum’s settings accurately. From the interface, you can connect the vacuum to the WiFi. It’s essential to connect the vacuum to the WiFi, as it won’t function otherwise. The Roborock vacuum requires a proper WiFi connection to function effectively.

If you want to know the proper process for the Roborock vacuum setup, we’ve got you. We are here with this post to help users with the Roborock S7 setup. In this blog, we will go over the complete procedure for the setup. We will also discuss the issues you could face during the setup, along with the troubleshooting techniques.

Requirements for the Roborock Setup

To set up the Roborock vacuum, there are some things you must have. With all the necessary things you can set up the vacuum correctly. You require the following things for the setup:

The Roborock app

A Roborock account

An active internet connection

The WiFi password

Your smartphone

These are the requirements for the Roborock vacuum setup. Further, we will discuss the steps for the setup

Pre-Roborock S7 Setup Instructions

Before we proceed with the Roborock setup, there are some things you need to do. To set up the vacuum correctly, you must charge the vacuum. Otherwise, you will have trouble setting up the Roborock vacuum. To charge the vacuum, you need to set up the charging dock of the vacuum. Follow the below steps to set up the charging dock:

1) Find a Location for the Charging Base

To set up the charging base, you need to find the most appropriate location for the base. The location of the charging base has a huge impact on the Roborock vacuum. If you place the charging base inaccurately, you will face several issues. The suitable location for the base is in an open area, and there shouldn’t be any interference around the base as well.

2) Plug In the Charging the Base

Once you have chosen a location for the Roborock charging base, you must assemble it accordingly and power it on. Ensure to keep the charging always plugged into a stable power source. Otherwise, the vacuum will not charge properly whenever it needs a charge.

3) Place the Vacuum on the Charging Base

Once the charging base has a stable power source, you can place the vacuum on the base to charge it. Charging the Roborock vacuum is crucial in order to set it up accurately. Without a sufficient charge, you cannot connect the vacuum to the WiFi and use it accordingly.

These are some pre-setup instructions you need to follow to ensure a smooth Roborock S7 setup procedure. Once you are done with setting up the charging base, you can set up the vacuum easily. Further, we will explain the complete process of setting up the Roborock.

Steps for the Roborock Setup

Now that the vacuum is fully charged, you can set up the vacuum correctly. All you need to do is install the app on your smartphone. Through the app, you can set up the vacuum easily. The steps for the Roborock vacuum setup are as follows:

To begin with, download the Roborock app on your smartphone.
You can download the app from either the Play Store or the App Store.
Now, open the app and create your account using the correct information.
If you have an account, you need to enter the right credentials in the fields.
Hereon, you need to add the vacuum to the app by selecting the correct model.
Ensure to select the correct model to add it to the Roborock app.
Connect your smartphone to the appropriate WiFi network.
The WiFi indicator on the robot vacuum is flashing, indicating it’s reading to connect.
After that, connect your phone to the router’s network to connect to the WiFi.
Give some time and let the robot connect to your smartphone as well.
Once a connection is made, you will see the Use Now option in the app.
At last, you can start configuring the vacuum’s settings accordingly from the app.

These are the steps for the Roborock vacuum setup. Once you are done with the setup, you can form a map and start with the cleaning run. However, if you are having trouble with the Roborock vacuum setup, keep reading ahead.

Troubleshooting the Roborock S7 Setup Issues

You can face trouble setting up your Roborock vacuum as well. When you face issues with your Roborock vacuum, you need to fix them. You must fix the setup issues, as the vacuum won’t function properly otherwise. To fix the issues within the vacuum, you can try the following methods:

Charge the Vacuum

You need to charge the vacuum before you set up the vacuum.
If the vacuum is having trouble charging, you must fix it.
Check if the charging base has a proper power source.
If the current power source isn’t working properly, you must change it.
You can try plugging the base into another power source.
Hereon, you must try again with the Roborock S7 setup.

Fix the Router

There could be issues within the router as well causing the connectivity issues.
You must connect the vacuum to the WiFi, as it won’t work otherwise.
Before connecting the vacuum to the WiFi, you must troubleshoot the router.
You can try power cycling, updating the firmware, or resetting the router.
Now try again with the Roborock setup and reconnect it to the WiFi.

Connect your Phone to the WiFi

You must connect your smartphone to the WiFi before you set up the vacuum.
If the smartphone isn’t connected to the WiFi, you cannot set up the vacuum.
Ensure to use the correct WiFi password while connecting your device to the WiFi.
If you recently changed the WiFi password, the device will disconnect from the WiFi.
You need to reconnect your device to the WiFi using the new WiFi password.

Move the Devices Closer

Due to too much distance between the vacuum and your device, you can face issues.
Therefore, ensure that the devices are closeby while you are setting the vacuum.
When there’s too much distance, the device will have trouble detecting the network.
Therefore, you can move the device closer to the vacuum for the setup.
Moreover, you can also consider moving your vacuum near the device for the Roborock setup.

Use the Correct Login Credentials

If you are having trouble logging in, check the login credentials you are using.
You must use the correct login details to log into the interface successfully.
If you are having trouble creating your account, check the details you entered.
You must use the correct information to create your account accurately.
If you forget the login details, you can reset them from the login page.

Fix the App Issues

There could be issues within the app that can cause issues.
Check if the app requires an update and update it accordingly.
An outdated app version will cause various issues with the login.
You can also try uninstalling and reinstalling the app to fix the issues.
Now, you must try again with the Roborock vacuum setup.

These are some troubleshooting methods you can use to fix the Roborock setup issues. Now, you should be able to set up the vacuum correctly. Ensure to follow the setup instructions correctly to set up the vacuum accurately. If you require assistance with anything else, you must reach out to our expert team right now to learn more.

FAQs

Can the Roborock Vacuum clean carpets effectively?

It mainly depends on the carpet stuff. The vacuum works well on soft carpets. Whereas, the vacuum will not function properly on hard carpet stuff. Therefore, you must remove the carpets to ensure optimal functioning of the vacuum. By removing the carpet, you can obtain proper cleansing of the floorplan.

How do I connect my Roborock vacuum to Wi-Fi?

To connect the Roborock vacuum to the WiFi, you must install the Roborock app on your smartphone. Through the app, you can set up the vacuum correctly and connect to the WiFi. You just need to connect your smartphone to the WiFi. Afterward, you need to connect the vacuum to the phone and the connection will be successful.

Can you use Roborock without an app?

No, you cannot use the Roborock vacuum without the app. From the app, you can configure the vacuum’s settings correctly. Without the app, you cannot use and operate the app properly. Therefore, ensure to install the app and add the vacuum. After that, you must set it up correctly to make the most of the vacuum. You can set up a map and access its features.